Français
Deutsch
Italiano
Español
Português
日本語
العربية
Türkçe
Polski
Product Details
Highlight:
42 mm Max Processing Diameter Swiss CNC Lathe
,Double Spindle DT38-5 CNC Lathe
,SYNTEC System 5 Axis CNC Lathe
System:
Taiwan SYNTEC
Detail:
Syntec220TB-A
Control Channels:
Dual Channel
Minimum Setting Unit:
0.001mm
Max Processing Diameter:
42 Mm
Main Spindle Max Drilling Dia:
Φ23mm
Main Spindle Tapping Dia:
M16
Rotary Tools Max Drilling Dia:
Φ10mm
Rotary Tools Max Tapping Dia:
M8
Sub Spindle Max Drilling Dia:
Φ13mm
Sub Spindle Max Tapping Dia:
M12
Main Spindle Power(Rated/Max):
11kw/18.5kw
Sub Spindle Power(Rated/Max):
3.7kw/7.5kw
Moving Axis:
6 Axis (X1,Y1,Z1,X2,Z2,Y2)
Lathe Weight:
4200KG
Product Description
JIANKE DT38-5 Double Spindle 5 Axis Swiss CNC Lathe with SYNTEC System and 42 mm Max Processing Diameter
Product Overview
JIANKE DT38-5 II Double Spindle 5 Axis Swiss CNC Lathe Machine with SYNTEC System delivers precision machining for complex small-diameter components.
Key Features
- Dual Processing Modes: Rotary guide bush mode supports shaft workpieces with 230mm single feeding length and multiple feeding capability. Without guide bush mode ideal for short workpieces with length to diameter ratio less than 1:2.5.
- Internal Oil Cooled Electric Spindle: Japanese oil cooled electric spindle technology with independent design, providing superior rigidity, torque force, and stable processing accuracy. Features NSK bearings for extended spindle life.
- Advanced Scrap Collection: Separation platform for chip collection with preliminary oil chip separation. 340L cutting oil tank with multi-channel filter screens and oil return baffles.
- Flexible Workpiece Ejection: Standard front discharge for parts under 115mm via built-in conveyor belt. Optional rear discharge for parts over 90mm through sub spindle center.
- Plug-in Expansion Modules: Supports plug-in expansion modules for both main and sub spindle rotary tools. Optional B-axis upgrade provides 0-120° linkage rotation for complex angle processing.
Standard Accessories
| NO | Name | Qty | Note |
|---|---|---|---|
| 1 | Protective cover | 1 set | |
| 2 | Nameplate | 1 piece | |
| 3 | Spindle | 2 units | Main and Sub spindle |
| 4 | Knife holder for turning tools | 1 set | 1*20X20mm 6*16X16mm |
| 5 | Main spindle side rotary tools base | 1 set | 6*ER20+3*ER16 |
| 6 | Main spindle end face drilling base | 1 set | 2*ER20+3*ER16 |
| 10 | Sub spindle end face drilling tools base | 1 set | 5*ER20/ER16 |
| 11 | Live rotary guide bush | 1 set | |
| 12 | Pneumatic system | 1 set | |
| 13 | Cooling system | 1 set | |
| 14 | Lubricating system | 1 set | |
| 15 | Electrical system | 1 set | |
| 16 | Parts receiver/collector | 1 set | Standard with front ejector/belt conveyor |
| 17 | Lathe lighting | 1 set | |
| 18 | Lathe three color alarm light | 1 set | Three color lights + Beep alarm |
| 19 | Tool box | 1 set | Including wrenches, screwdrivers, and oil kettles |
| 20 | Transformer | 1 unit | |
| 21 | Manual book | 1 set | Lathe manuals/System book/Spare parts list/Quality testing report |
Optional Equipment
| NO | Name | Functions | Note |
|---|---|---|---|
| 1 | Bar feeder | Automatic feeding/refueling for long bar materials; Automated production | Recommended essential |
| 2 | High pressure pump | Assist with chip breakage, chip removal, and erosion; Extend tool life; Improve accuracy | Select according to demand |
| 3 | Oil mist collector | Absorb atomized oil mist; Maintain workshop environment | Select according to demand; Mandatory if equipped with high pressure pump |
| 4 | Chip conveyor | Chain type conveyor removes chips; Reduces manual chip removal workload | Select according to demand |
| 5 | Plug type modules | End face rotary tools/Angle rotary tools/Thread whirling/Hobbing base/Saw blade base/Boring tool base | Confirm with JIANKE according to actual machining requirements |
| 6 | Long parts discharge from backwards | Eject long parts from rear of sub spindle | Select according to demand |
Main Accessory Brands
| Name | Origin and Brand |
|---|---|
| Operation System | Fanuc |
| Spindle and Driver | Oil cooling electric spindle/Fanuc driver |
| Bearing | Japan NSK |
| Guide rail | Japan THK/Taiwan Hiwin/Taiwan PMI |
| Guide screw | Japan THK/Taiwan Hiwin/Taiwan PMI |
| Servo Motor | Fanuc |
| Motor driver | Fanuc |
| Electrical components | France Schneider |
| Lubricant system | Japan Herg |
| Relay | Japan Omron |
| Stroke switch | Japan Omron |
| Magnetic valve | Taiwan Airtag |
Raw Material Requirements for Long Bar Processing
- Recommended use of polished/precision drawn materials with single bar length ≤ 3M
- Material diameter tolerance consistency within ± 0.02mm
- Material roundness tolerance consistency within 0.005-0.01mm
- Material straightness within 0.35mm/m
- All bar materials require chamfering at both ends
- Large-diameter and irregular materials require tail turning to match bar feeder collet
- Prior declaration required for material hardness above HRC28 degrees
Quality Assurance and Technical Support
Warranty: One year from date of final acceptance. Free service for normal use damage. Material fees only charged for improper use damage within first year.
Pre-sales Service: Free basic training for technical personnel at factory for CNC lathe operation, debugging and maintenance.
In-sales Service: Personnel sent to buyer's factory for free basic training upon equipment arrival.
After-sales Service: 24-hour response for on-site resolution requirements. Remote technical guidance provided for difficult parts and high technical requirements.
Technical Specifications
| Parameter | Specification |
|---|---|
| System | Taiwan SYNTEC Syntec220TB-A |
| Control channels | Dual channel |
| Minimum setting unit | 0.001mm |
| Max processing diameter | 42 mm |
| Maximum single feeding length (Rotary guide bush) | 235mm |
| Maximum single feeding length (Without guide bush) | 1:2.5D (Dia:Length) |
| Main spindle max drilling diameter | Φ23mm |
| Main spindle max tapping diameter | M16 |
| Rotary tools max drilling diameter | Φ10mm |
| Rotary tools max tapping diameter | M8 |
| Sub spindle max drilling diameter | Φ13mm |
| Sub spindle max tapping diameter | M12 |
| Main spindle O.D. tools | 7 pieces (1*20X20mm+6*16X16mm) |
| Main spindle side rotary live tools | 9 pieces (6*ER20+3*ER16) |
| Main/Sub spindle speed | Main 6000rpm/min, sub 8000rpm/min |
| Main/Sub spindle through hole diameter | 44mm/42mm |
| Main spindle power (Rated/Max) | 11kw/18.5kw |
| Sub spindle power (Rated/Max) | 3.7kw/7.5kw |
| Moving axis | 6 axis (X1,Y1,Z1,X2,Z2,Y2) |
| Rapid feeding speed | 18m/min |
| Power capacity | 43kw |
| Air pressure | ≥0.4MPa |
| Capacity of machining oil tank | 315L |
| Lathe size | 2730*1640*2161 mm |
| Lathe weight | 4200 KG |
You May Also Like
Video
JIANAKE ZR20-5Ⅱ 5 Axis Double Spindle Swiss Type CNC Lathe with 20mm Max Processing Dia and 10000rpm Oil-Cooled Spindle
ZR20-5Ⅱ 5-axis double spindle Swiss CNC lathe with 20mm max diameter, 90mm length capacity, and 10000rpm oil-cooled spindles. Features Taiwan SYNTEC system, THK/NSK components, and versatile turning/milling capabilities for high-precision shaft parts.
Video
JIANKE MA25-6SP Swiss Type CNC Lathe with B Axis Power Mechanism and Deep Drill Max 400mm Sliding Headstock Lathe
Jianke MA25-6SP Swiss Type CNC Lathe features guide bush/non-guide bush modes, oil-cooled electric spindles, 400mm deep drilling capacity, B-axis power tool holders, and dual workpiece ejection. With Syntec system, NSK bearings, and 250L oil tank, it ensures precision machining for diameters up to 25mm.
Video
JIANKE MA25-5B 5 Axis Double Spindle Swiss CNC Lathe with Internal Oil Cooling Electric Spindle and 26mm Max Processing Diameter
MA25-25B 5 Axis Double Spindle Swiss CNC Lathe Machine features dual internal oil cooling electric spindles (10000rpm), 18 tool positions including B-axis rotary live tools, and Syntec220TB dual-channel control. Offers max Φ26mm processing, 200mm feeding length, and modular expansion capabilities for precision machining.
Video
JIANKE MA25-5II 5-axis Twin Spindle Swiss CNC Lathe with 10000rpm/min Speed
MA25-5Ⅱ 5-axis twin spindle Swiss CNC lathe offers high precision (0.001mm) with dual 10000rpm oil-cooled spindles, 26mm max diameter capacity, and versatile tooling (6 OD tools + 8 live/fixed tools). Features include changeable guide bush modes, 5-axis movement, Syntec dual-channel control, and modular expansion options for flexible B2B manufacturing.
Contact Us
You Can Contact Us At Anytime!
