86-025-57866111 jianke@jiankem.com
Home  /  Products  /  6 Axis Longitudinal CNC Lathe  /  JIANKE MA25-6SP Swiss Type CNC Lathe with B Axis Power Mechanism and Dual Mode Operation for Deep Drill Max 400mm
Quality JIANKE MA25-6SP Swiss Type CNC Lathe with B Axis Power Mechanism and Dual Mode Operation for Deep Drill Max 400mm factory
Quality JIANKE MA25-6SP Swiss Type CNC Lathe with B Axis Power Mechanism and Dual Mode Operation for Deep Drill Max 400mm factory

JIANKE MA25-6SP Swiss Type CNC Lathe with B Axis Power Mechanism and Dual Mode Operation for Deep Drill Max 400mm

Product Details
Highlight:

Dual Mode Operation Swiss Type CNC Lathe

,

B Axis Power Mechanism Swiss Type CNC Lathe

,

Deep Drill Max 400mm Swiss Type CNC Lathe
Product Description
JIANKE MA25-6SP Swiss Type CNC Lathe with B Axis Power Mechanism Deep Drill Max 400mm and Dual Mode Operation Sliding Headstock Lathe
Machine Overview

Advanced dual spindle Swiss CNC lathe featuring longitudinal sliding headstock design with comprehensive machining capabilities.

Lathe Structure & Tool Holder Configuration
MA25-6SP Swiss Type CNC Lathe exterior view showing tool holder structure MA25-6SP CNC Lathe structural diagram illustrating internal components
Key Features
  • Dual Mode Operation: Supports both guide bush mode (for slender workpieces up to 300mm single feeding length) and non-guide bush mode (for short workpieces with length-to-diameter ratio under 1:2.5)
  • Advanced Spindle Technology: Built-in oil-cooled electric spindle with Japan NSK bearings for enhanced rigidity, torque, and machining accuracy stability
  • Efficient Chip Management: Integrated scrap collection tank with 250L cutting oil tank featuring multiple filtration systems and natural cooling
  • Flexible Workpiece Ejection: Front discharge for parts under 85mm via conveyor belt, rear discharge through sub-spindle for longer parts
  • Deep Hole Drilling: Sub-spindle with bush device enables synchronized processing with effective stroke of 400mm (main spindle 320mm + sub spindle 80mm)
  • B-Axis Power Tool Holder: 0-90° B-axis mechanism on main spindle for multi-angle engraving and milling; optional B-axis on sub-spindle available
Technical Specifications
Control System Taiwan SYNTEC Syntec220TB-A (Dual Channel)
Minimum Setting Unit 0.001mm
Maximum Processing Diameter 25 mm
Main Spindle Max Drilling Diameter Φ10mm (axial)
Main Spindle Max Tapping Diameter M8 (axial)
Rotary Tools Max Drilling Diameter Φ8mm (radial)
Sub Spindle Max Drilling Diameter Φ8mm (axial)
Main/Sub Spindle Speed 10000 rpm/min
Main Spindle Power (Rated/Max) 2.5kw/3.7kw
Number of Moving Axes 6-axis (X1, Y1, Z1, X2, Z2, Y2)
Machine Dimensions 2.4m * 1.4m * 1.7m
Machine Weight 3050 KG
※ For reference only, subject to actual contract. Some parameters may be adjusted according to actual conditions.
Tool Configuration

Main Spindle Tools:

  • 6 O.D. tools (1*16X16mm + 5*12X12mm)
  • 4 side rotary live tools (2*ER11 + 2*ER16)
  • 4 spindle B-axis powered tool holders (ER16)

Sub-Spindle Tools:

  • 2 side milling tool seats (ER16)
  • 2 turning tools (12X12mm)
  • 3 end face fixing seats (ER16)
  • 3 end milling heads (ER16)
  • 3 sub-axis B-axis tools (ER16)
Standard Accessories
Item Quantity Remark
Protective cover 1 set
Spindle 2 Main spindle + sub spindle
Turning tool seat 1 group 1*16*16 + 5*12*12
Side powered tool holder 1 group 2*ER11 + 2*ER16
Machine tool lighting 1 set
Three-color warning light 1 set Three-color alarm + buzzer alarm
Toolbox 1 set Conventional wrenches, screwdrivers, oil cans
Optional Accessories
Name Functions Note
Bar feeder Automatic feeding/refueling for long bar materials; automated production Recommended essential
High pressure pump Assists with chip breakage, removal, and erosion; extends tool life Select according to demand
Oil mist collector Absorbs atomized oil mist, maintains workshop environment Select according to demand
Chip conveyor Chain type conveyor removes chips, reduces manual chip removal Select according to demand
Plug type modules End face rotary tools, angle rotary tools, thread whirling, hobbing base, etc. Confirm with JIANKE according to requirements
Main Component Brands
Component Origin and Brand
Operation System Syntec
Spindle and Driver Oil cooling electric spindle/Syntec driver
Bearing Japan NSK
Guide rail Japan THK/Taiwan Hiwin/Taiwan PMI
Servo Motor Syntec
Electrical components France Schneider
Lubricant system Japan Herg
Raw Material Requirements
  • Polished/fine-drawn materials recommended with maximum bar length ≤3M
  • Material diameter tolerance consistency within ±0.02mm
  • Material roundness tolerance within 0.005-0.01mm
  • Material straightness within 0.35mm/m
  • Both ends of all materials must be chamfered
  • Large diameter and special-shaped materials may require tail turning for feeder compatibility
  • Materials with hardness above HRC 28 must be declared in advance
The above are general requirements for Swiss-type lathe raw materials. Tolerances can be adjusted according to actual product precision requirements.
Related Products
Cost Conscious Production Swiss Lathe Dental Device Swiss Lathe Panel Swiss Lathe Quick Tool Change Swiss Lathe Spare Part Swiss Lathe Tool Change Swiss Lathe
You May Also Like
Quality JIANAKE ZR20-5Ⅱ 5 Axis Double Spindle Swiss Type CNC Lathe with 20mm Max Processing Dia and 10000rpm Oil-Cooled Spindle factory
Video

JIANAKE ZR20-5Ⅱ 5 Axis Double Spindle Swiss Type CNC Lathe with 20mm Max Processing Dia and 10000rpm Oil-Cooled Spindle

ZR20-5Ⅱ 5-axis double spindle Swiss CNC lathe with 20mm max diameter, 90mm length capacity, and 10000rpm oil-cooled spindles. Features Taiwan SYNTEC system, THK/NSK components, and versatile turning/milling capabilities for high-precision shaft parts.
Quality JIANKE MA25-6SP Swiss Type CNC Lathe with B Axis Power Mechanism and Deep Drill Max 400mm Sliding Headstock Lathe factory
Video

JIANKE MA25-6SP Swiss Type CNC Lathe with B Axis Power Mechanism and Deep Drill Max 400mm Sliding Headstock Lathe

Jianke MA25-6SP Swiss Type CNC Lathe features guide bush/non-guide bush modes, oil-cooled electric spindles, 400mm deep drilling capacity, B-axis power tool holders, and dual workpiece ejection. With Syntec system, NSK bearings, and 250L oil tank, it ensures precision machining for diameters up to 25mm.
Quality JIANKE MA25-5B 5 Axis Double Spindle Swiss CNC Lathe with Internal Oil Cooling Electric Spindle and 26mm Max Processing Diameter factory
Video

JIANKE MA25-5B 5 Axis Double Spindle Swiss CNC Lathe with Internal Oil Cooling Electric Spindle and 26mm Max Processing Diameter

MA25-25B 5 Axis Double Spindle Swiss CNC Lathe Machine features dual internal oil cooling electric spindles (10000rpm), 18 tool positions including B-axis rotary live tools, and Syntec220TB dual-channel control. Offers max Φ26mm processing, 200mm feeding length, and modular expansion capabilities for precision machining.
Quality JIANKE MA25-5II 5-axis Twin Spindle Swiss CNC Lathe with 10000rpm/min Speed factory
Video

JIANKE MA25-5II 5-axis Twin Spindle Swiss CNC Lathe with 10000rpm/min Speed

MA25-5Ⅱ 5-axis twin spindle Swiss CNC lathe offers high precision (0.001mm) with dual 10000rpm oil-cooled spindles, 26mm max diameter capacity, and versatile tooling (6 OD tools + 8 live/fixed tools). Features include changeable guide bush modes, 5-axis movement, Syntec dual-channel control, and modular expansion options for flexible B2B manufacturing.
Contact Us
You Can Contact Us At Anytime!